Wireless Remote Control 4 Channel Long Range Radio, Well Pumps, Gates Tank Level

Description

Industrial Wireless Radio Controls   Waterproof Enclosure
Four (4) Channel
Performance
■
■ 2 Miles (3 km) line-of-sight Optional 938433 antenna.
■
Input Dry isolated contact N/O
■
Relay output SPST 5 Amp @ 30V/ 240VAC Class 2 Pilot duty
Installation features
■ Operation license-free 154MHz ISM band
■ Easy installation,
No programming
■ Inside or outside mounting,  IP65 Aluminum enclosure
Supplied:
One Transmitter,
One Receiver
Two 7 inch Omni antennas
NEMA 4  Fiber Enclosures 9x9x3 inches
Four Channel   Radio System  ( Transmitter and Receiver )
Package include:
One Transmitter, One Receiver and Two short range 7 Inch antenna with 5ft coax cable w SMA connector
■  OPTIONAL LONG RANGE antennas search Ebay for   938432  yagi
■ Dry isolated
input
contact N/O
■ Relay output SPST N/O 5 Amp,  30V DC /240VAC Class 2, Pilot Duty
Operation 12VDC  Solar Ready
FREE   Power Supply     (2) DIN  12VDC Input 120/240VAC
Applications:
Industrial Monitoring, Pump control, Lighting controls,
Monitor remote instruments, sensors and detectors, Generators
Packing and mobile system, SCADA installations,
Factory process control and alarms.
Specifications
Digital Transmitter
Supply power
12 VDC @ 400 mA
Inputs
N/O Normally Open, digital dry contact
Transmitter power
per FCC Part 15.249,  50mV/m @ 3m
Transmission
Digital Encoded
Gaussian_frequency-shift_keying
Channels
16 addresses per system  GFSK
Input Wiring
Flat wire,  Dry Contact
Response
Loop 500 msec
Weight
0.8 lb (0.40kg)  each unit
Dimensions
9x9x3 inches
Specifications
Digital Receiver
Supply power
12 VDC  @ 300 mA
Output
Relay SPST  contact  5.Amp, 30V   Class 2 pilot duty
Frequency
154 MHz  • License free Industrial ISM band
Configuration
DIP switch factory preset
Compliance
FCC CFR part 15.247, 95 sub E
Wiring
Flat wire 8 inch
Antenna Z
50 Ohm S239 RF connector
Ambient temp
14° to 140° F (-10° to 60° C)
Enclosure
NEMA4 Fiber
, IP65, Dust and
Waterproof
DISCLAIMER:
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.