Wireless Remote Control 37mm DC 12V Motor Forward & Reverse With Speed Optional

Description

0020527
Wireless  Remote Control 37mm DC 12V Heavy Duty High Torque  Gear Box
Motor Forward & Reverse With Speed Optional
Model: 0020579
Package  Include:
1 x Receiver: S1FU-DC12 (Inversion Control  Mode)
2 x Transmitter: C-3-2
1 x DC Motor
1 x User manual
Feature:
Wireless control, easy to install
Control motors of rolling blinds / doors,  projection screens, awnings, pumps, winches, conveyors or other appliances and  mechanicals with voltage DC 12V.
You can turn on/off the receiver with  transmitter (remote control) from any place within a reliable distance; the  wireless signal can pass through walls, floors and doors.
With characteristics of reverse power  protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an  8-bit microprocessor designed and developed with low-power and high-speed CMOS  technology.
Reliable control: The transmitter (Encoding)  and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control  one/several receivers simultaneously.
If you use two or more receivers in the same  place, you can set them with different codes.
Transmitting  Frequency: 315MHz / 433MHz (And we can also offer 433MHZ,if you want, please  contact us.)
Receiver:
Model No.: S1FU-DC12
Control Modes: Inversion (Toggle, Momentary, Latched)
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating  Voltage): DC12V±1V (S1FU-DC12)
Output: DC12V (S1FU-DC12)
PCB size: 67mm x 50mm x 18mm
Case size: 75mm x 54mm x 27mm
Static Current: ≤6mA
Maximum Working Current:  10A
Transmitter:
Model No.: C-3-2
Channel: 3 CH
Remote Control Distance:  100m / 300ft (theoretically)
Encode: Fixed code by bonding pad encoded
Unit size: 58mm x 39mm x 16mm
Power Supply: 1 x 23A  -12V battery (included, can be used for 12 months)
Usage:
Connect the motor to Terminal B of relay  1 and relay 2.
Setting different control modes (We have set the receiver as Toggle control mode  before delivery. If you want to use other control modes, do as following  operation):
Setting control mode  Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> Rotate; Press again -> Stop.
Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －),  motor rotates in the positive direction.
Press button ▲ again: Terminal B of relay 1 and relay 2 no output, motor stops
Press button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋),  motor rotates in the reversal direction.
Press button ▼ again: Terminal B of relay 1 and relay 2 no output, motor stops
Setting control mode  Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> Rotate; Release -> Stop.
Press and hold button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1:  ＋, 2: －), motor rotates in the positive direction.
Release button ▲: Terminal B of relay 1 and relay 2 no output, motor stops
Press and hold button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1:  －, 2: ＋), motor rotates in the reversal direction.
Release button ▼: Terminal B of relay 1 and relay 2 no output, motor stops
Setting control mode  Latched: Do not connect Jumper-1 and Jumper-2.
Control mode Latched: Press button ▲ and ▼ -> Rotate; Press button ■ -> Stop.
Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －),  motor rotates in the positive direction.
Press button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋),  motor rotates in the reversal direction.
Press button ■: Terminal B of relay 1 and relay 2 no output, motor stops
Informations for DC motor:
Feature:
Gearhead motor
High quality
With metal cover
Built-in cooling fan
Heavy duty design
Runs in either direction by reversing power supply polarity
Benefiting from high torque and low noise, this motor is solidly  constructed and ready to install in numerous applications
Specifications:
Diameter: 37mm
Length (excluding shaft):  92.5mm
Total length: 119mm
Shaft length: 15.5mm
Shaft diameter: 6mm
Front panel 3.0mm Screw  for fixing this motor
Nominal voltage: 12V DC
Operating voltage range:  3 - 18V DC
No load speed at 12 V:  16rpm/32rpm/54rpm/100rpm/295rpm/868rpm/2000rpm
No load current: 1.6A
Load speed: 46 rpm/14  rpm/27 rpm/85 rpm/250 rpm/738 rpm/1600 rpm
Load current: 1.5A
Operating torque: 45kg.cm
Stall torque: 180kg.cm
Stall current: 7A
Gear ratio: 1:305
Power: 60W
Weight: 340g
Application:
Mainly used for  remote-controlled car, electric motorbike, ATV, Kart, robot, rolling blind and  electric projector, etc.
Warning:
Do not frequently stall  the motor, or else the gear of motor will be broken.
Owing to large torque and  high power, the starting current of motor is relatively large, up to 6A. After  starting the motor, the current will be back to normal, about 1A~2A. You should  choose high power supply above 10A, or else you cannot start the motor.
Shipping:
Shipping methods: Ship to Worldwide by Airmail.
Delivery time: 10~25 working days (not including week-end and holiday).
We will ship the item to your shipping address of PayPal within 1~2 working days after clearance of payment.
Please contact us immediately if you want to change your shipping address. We are not responsible for wrong address.
We will inform you via Email when shipping your items.
Guarantee:
Guaranty: One year, if the products have any quality problem, we will resend the same unit to you by free, but you need to defray the postage.