Wireless Pump Control Tank, Well, Lights, Remote Relay Switch 1Ch FREE Float SW

Description

Industrial Wireless Radio Controls
Wheaterproof enclosure
Wireless Remote Control Switch Transmitter / Relay Receiver Set and Two Omni Magnetic Base Antenna.
Part N 943302
Features
Range: Up To 1500ft Line-of-sight
Receiver Relay 5 Amp SPST,   N/O  Class 2 Pilot Duty
Power required 12 VDC  ( POWER SUPPLY 120/220VAC  INCLUDED)
NEMA 4  Fiber Enclosures 9x9x3 inches
Factory configured, Ready-To-Operate
License Free Radio Operation 433MHz, ISM Band
OPTIONAL   Long Range 3 Km Yagi antenna   Search Ebay for    yagi938432
Applications:
Tank Level Monitoring, Pump or Motor Control, Valve Activation, etc.
Description
The 943301 transmitters and receivers are designed for use in various wireless remote-control applications.
When triggered with an external dry-contact float switch, Pressure Sw, timer sw. etc,
the transmitter will send a digital encoded signal to its companion control receiver.
The receiver will verify the digital code and then activate its relay output.
INCLUDED :  Power Supply  110/220VAc input  12VDC regulated output
Wireless System General Specifications
Radio Frequency:      433 MHz
Regulatory:     FCC Part 15 (No license required)
Control Channels:     1
Transmitter/Receiver Code Matching: Factory set
Antenna Connection:     RP-SMA
Wiring Connection:     Wires
Transmit/Receive Range
(with included antennas): Indoor/Urban 500mts (1700ft), Line-of-sight 1 Km
Operating Temperature:     -22 to 113 ºF (-30 to 45 ºC)
Enclosures:     NEMA 4  Fiber
Antennas:      4dBi, Omni 7 inch w 5 ft coax (Included)
Transmitter Specifications
Control Input Type:    wires (Dry-contact)
RF Power Output:     1000mW
RF Data Rate:     250 kbps
RF Output Impedance:     50 Ohm nominal
Operating Power:     12 VDC @ 5W max
Receiver Specifications
Receive Sensitivity:     -100 dBm
RF Input Impedance:     50 Ohm nominal
Operating Power:     12 VDC @ 3W max
Control Output:     Relays, 30A, 30V/240VAC, SPDT Class 2 Pilot duty
Regulatory Compliance   FCC Part 15 (No license required)