Wireless DC12/24V Motor Controller Remote Control one DC Motor Rotation

Description

0020527
Wireless  DC12/24V Motor Controller With Restrictive Function  Remote Control one DC Motor Rotation
Model: 0020601
This is the DC  motor  controller. The  DC motor  controller can  remote control  one DC motor
(DC12V/24V)
rotates in  positive/  reversal  direction. You  can connect two  restrictive  switches to  receiver and use  them to stop  motor rotation.
Package  Include:
1 x Receiver:
S1PF3-DC12 / S1PF3-DC06 / S1PF3-DC09 / S1PF3-DC24
2 x Transmitter: CWC-3
1 x User manual
Feature:
Wireless control, easy to install
Waterproof case with waterproof connectors.  The receiver can be installed outdoors.
With high  power of 30A
Control DC motors of rolling blinds / doors,  projection screens, awnings, pumps, winches, conveyors or other appliances and  mechanicals with voltage
DC6V/9V/12V/24V.
You can rotate the motor in positive or  reversal direction with the transmitter (remote control) from any place within a  reliable distance; the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding)  and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control  one/several receivers simultaneously.
If you use two or more receivers in the same  place, you can set them with different codes.
Transmitting  Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1PF3-DC12 / S1PF3-DC06 / S1PF3-DC09 / S1PF3-DC24
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating  Voltage): DC6V (S1PF3-DC06), DC9V±1V (S1PF3-DC09), DC12V±1V (S1PF3-DC12),  DC24V±1V (S1PF3-DC24)
Output: DC6V  (S1PF3-DC06), DC9V (S1PF3-DC09), DC12V (S1PF3-DC12), DC24V (S1PF3-DC24)
Case Size: 100mm x 67mm x 39mm
Quiescent Current: 5mA
Rated Current: 15A
The Maximum Instantaneous  Current of Starting Motor: 30A
Transmitter:
Model No.: 0021102(CWC-3)
Channel: 3 CH
Waterproof
Remote Control Distance:  50m / 300ft (theoretically)
Encode: Fixed code by soldering
Unit Size: 58mm x 30mm x 12mm
Power Supply: 1 x 23A  -12V battery (included, can be used for 12 months)
Usage:
Power supply:
Connect power supply DC6V / 9V / 12V / 24V to terminal “INPUT”; connect motor to  terminal “OUTPUT”. You can exchange the output wires of motor to change the  rotating direction of motor.
Setting control mode Latched: Connect  JP1
Function of transmitter:
Press button ▲ on remote: terminal “Output” outputs DC power, motor rotates in  positive direction.
Press button ▼ on remote: terminal “Output” outputs DC power, motor rotates in  reversal direction.
Press button ● on remote: motor stops.
Function of manual buttons in receiver:
Press button K3 in receiver: terminal “Output” outputs DC power, motor rotates  in positive direction.
Press button K1 in receiver: terminal “Output” outputs DC power, motor rotates  in reversal direction.
Press button K2 in receiver: motor stops.
Setting control mode Momentary: Connect JP2
Function of transmitter:
Press and hold button ▲ on remote: terminal “Output” outputs DC power, motor  rotates in positive direction. Release button: motor stops.
Press and hold button ▼ on remote: terminal “Output” outputs DC power, motor  rotates in reversal direction. Release button: motor stops.
Function of manual buttons in receiver:
Press and hold button K3 in receiver: terminal “Output” outputs DC power, motor  rotates in positive direction. Release button: motor stops.
Press and hold button K1 in receiver: terminal “Output” outputs DC power, motor  rotates in reversal direction. Release button: motor stops.
Setting control mode Momentary: Connect  Jumper S2
Function of manual buttons in receiver:
Press and hold button K3 in receiver: terminal “Output” output DC power, motor  rotates in positive direction. Release button: motor stops.
Press and hold button K1 in receiver: terminal “Output” output DC power, motor  rotates in reversal direction. Release button: motor stops.
Restrictive function:
You can connect two restrictive switches to  terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the  motor will rotate; if the restrictive switch X1 or X2 is disconnected, the motor  will stop automatically. That means when the restrictive switch “X1” is  connected, the motor will rotate in positive direction; when the restrictive  switch “X1” is disconnected, motor will stop automatically. When the restrictive  switch “X2” is connected, the motor will rotate in reversal direction; when the  restrictive switch “X2” is disconnected, motor will stop automatically.
Learning the button of transmitter:
1) Press and hold “K3” button of receiver;  when signal LED on the receiver begin to shine, release “K3” button. Before  signal LED shines 5 seconds, press ▲ button of transmitter, if the signal LED  off, that means learning is successful.
2) Press and hold “K2” button of receiver;  when signal LED on the receiver begin to shine, release “K2” button. Before  signal LED shines 5 seconds, press ● button of transmitter, if the signal LED  off, that means learning is successful.
3) Press and hold “K1” button of receiver;  when signal LED on the receiver begin to shine, release “K1” button. Before  signal LED shines 5 seconds, press ▼ button of transmitter, if the signal LED  off, that means learning is successful.
Delete the button of transmitter:
We have learned transmitter to the receiver.  If you don’t want the receiver to work with transmitter, you can delete all  codes of transmitter which are stored in the receiver. You can operate as  following:
Press and hold “K3” button of receiver; when  signal LED on the receiver begin to shine, then flicker, finally off, that means  deleting is successful.
Press and hold “K2” button of receiver; when  signal LED on the receiver begin to shine, then flicker, finally off, that means  deleting is successful.
Press and hold “K1” button of receiver; when  signal LED on the receiver begin to shine, then flicker, finally off, that means  deleting is successful.
Note:
Before you change from motor rotates in  positive direction to reversal direction or from motor rotates in reversal  direction to positive direction, you should stop rotating of motor firstly, then  remote control motor.
Shipping:
Shipping methods: Ship to Worldwide by Airmail.
Delivery time: 10~25 working days (not including week-end and holiday).
We will ship the item to your shipping address of PayPal within 1~2 working days after clearance of payment.
Please contact us immediately if you want to change your shipping address. We are not responsible for wrong address.
We will inform you via Email when shipping your items.
Guarantee:
Guaranty: One year, if the products have any quality problem, we will resend the same unit to you by free, but you need to defray the postage.