Wireless 4-Channel RF Remote Control Switch with Two Transmitters

Description

Document
Features
The wireless signal can pass through walls, floors and doors, strong penetration.
Stable and reliable performance, high receive sensitivity and confidentiality, large storage capacity and low energy consumption.
The internal circuit design adopts the SMD process and the acoustic surface resonator is used for frequency stabilization. The optional coding chip adopts SC2260/1527, and the power supply is powered by the built-in CR2016 two-cell battery.
Generally used in remote control of radio equipment, such as energy-saving lighting, home security systems, industrial or home remote control.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance.
Specification
Receiver:
Rated Voltage
12V
Weight
80g
Receiver sensitivity
more than -105dBm
Rated Current
10mA
Channel
4-channel
Working frequency
433mhz
Output current
Less than 2A
Max load current
10A
Transmitter:
Button
4 buttons
Weight
28g
Rated Voltage
6V
Rated Current
10mA
Encode
Intelligent learning
Working Operation
433MHZ
Working Current (DC6V)
≤13mA
Dimensions
70mm×38mm×15mm/2.76"×1.49"×0.59"
Light’s showing status
being pressed(blue light is on)
Working Mode:
Momentary
Don't connect jumper with any Pins
Latched
Connect jumper with Pin1 and Pin2
Toggle
Connect jumper with Pin3 and Pin4
Learning method
Press learning key on receiver, when you hear "Bi" from buzzer, immediately press the specified key on remote to learn, after the receiver receives the signal, you will hear "Bi" from buzzer, means learn successfully.
Clear Code
Long press learning key on receiver about 10 seconds until you hear "Bi" from buzzer, means saved information has been cleared successfully.
Wiring
Package
1 × Switch (Receiver)
2 x Transmitter
1 x English Manual