Qolsys IQ Hardwire 16-F Wireless Translator (QS7133-840)

Description

This listing has a total of 3 available 16F translators available for purchase separately.
Add hardwired security zones to your IQ Panel 2 (or 2+) with the Qolsys IQ Hardwire 16-F Wireless Converter. This security control board increases the amount of sensors and smoke detectors that can be supported in your Qolsys system. The board also provides power sources for multiple input zones, LED status lights, backup battery charging, and a siren relay.
Programmable security control board supports security and smoke detecting zones
Supports up to 10 2-wire smoke detectors and powers up to 15 input zones
Encrypted S-Line technology protects signals while supporting legacy 319.5 systems
LED lights indicate status of each individual zone
Up to 500 Milliamps of power for hardwired motion detectors, glass break detectors, and/or sirens
Charging circuit for back-up battery, fully supervised with power outage recovery
Installation Details
The IQ Hardwire 16-F Wireless Converter comes with a small plastic enclosure for easy mounting. Vertically install the Wireless Converter in your desired location within wireless range of your IQ Panel. Wire in your desired devices and sensors and attach the included antenna to the top of the control panel. Afterwards, pair the Converter with your IQ Panel by press and holding the "EOL LEARN" button on the Converter and placing your IQ Panel into "Auto Learn" mode.
Contents
Wireless Converter
Antenna
Enclosure
NOTE: Not for use with CO detectors.
Technical Details
Manufacturer Part #:
QS7133-840
UPC:
857497008039
Input Voltage:
16.0VDC Plug-In Transformer
Backup Battery:
12VDC 5AH Max (optional)
Dimensions:
5.5 H X 3.5 W inches
Operating Temperature:
32 to 122 degrees F (0 to 50 degrees C)
Humidity:
95% RH Max
EOL Supervision:
4.7K Ohm fixed or 1k-10k Ohm depending on Resistor Mode
Input Zones:
15 N/O or N/C (Normally Open/Normally Closed)
Smoke Zone:
1 two-wire smoke loop, 10 detectors max. Support for System Sensor@reg; 2W-B, 2WT-B, 2WTA-B*
Auxiliary Voltage Output:
12VDC @ 500mA Max
Tamper Zone:
Used for case tamper, no resistor
Relay Contact:
60VDC/1A Max drives siren
Ask any and all questions prior to purchase, returns will not be accepted as a result of your failure to read the full auction details. Item is as described and shown in photos.
RETURNS
:
It is the Customer's responsibility to examine the shipment and all claims for shortage. Any damages incurred during shipping that are not noted by the buyer upon receipt of their item will be the buyer's responsibility.  Photos of the claimed damage
must be uploaded
during the request to return process for initial verification.
A twenty percent (20%) Return/Restocking Fee plus applicable handling charges on returns and the insertion of this fee is at the seller's discretion.
When returning, buyer is responsible for all return shipping costs whether shipping costs are free or calculated at the time of purchase. The buyer is not informed of the seller's cost of shipping at the time of purchase when free shipping is offered, however we will deduct the original cost of shipping paid by us to the final return value when free shipping originally applied.
**IMPORTANT** Buyer MUST USE the seller's original packaging when placing a return. Any damages incurred during shipping that are not noted by the buyer, upon receipt of their item, will be the buyer's responsibility.
We DO NOT offer returns on items that are NOT damaged, defective, or misrepresented in anyway by the seller and are derived from BUYER'S REMORSE.
We ask that you use your full discretion before placing bids, offers, or any payment on an item that you are not certain you want. The policies listed here will be referred to for all return requests and limited warranty decisions. As per eBay policy, your bid is contractual, and I urge that your commitment is made with serious intent.