Long range DC 12V/24V motor wireless remote control kit with external telescopic

Description

0020527
Long  Range DC 12V/24V Motor Wireless Remote Control Kit  with External Telescopic Antenna
Model: 0020609
Package  Include:
1 x Receiver: S1PF3-ANT3
1 x Transmitter: CB-3
1 x User manual
Feature:
Application: It can be used in rolling blinds,  rolling doors, projection screens, awnings, pumps, winches, conveyors or other  appliances and equipments with DC motors, it can remote control DC motor rotates  in the positive or reversal direction.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case  and waterproof connector, it can be installed outdoors.
You can rotate a motor in the positive or  reversal direction with the transmitter (remote control) from any place within a  reliable distance.
The RF wireless signal can pass through walls,  floors and doors.
High Power: Each channel can work at maximum  current 15A.
With the external antenna, it can have a  further working range.
You can turn on/ off the receiver with  transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls,  floors, doors or windows.
With reverse power protection and over current  protection.
Reliable control: The receiver only works with  the transmitter which use same code.
One/several transmitters can control  one/several receivers simultaneously.
You can use two or more units in the same  place.
Receiver:
Model No: S1PF3-DC12-ANT3 / S1PF3-DC24-ANT3
Control Mode: Latched and Momentary
Power Supply (Operating  Voltage): DC12V±1V (S1PF3-DC12-ANT3), DC24V±1V (S1PF3-DC24-ANT3)
Output: DC12V  (S1PF3-DC12-ANT3), DC24V (S1PF3-DC24-ANT3)
Working Frequency: 315MHz  / 433MHz
Channel: 1 CH, can work with one DC motor
Static Current: ≤6mA
Maximum Working Current:  15A / each channel, so motor's maximum starting current can’t exceed 30A.
Case size: 100mm x 67mm x 39mm
Work with Fixed code transmitters or Learning code transmitters.
Transmitter:
Model No.: 0021025 (CB-3)
Channel/Button: 3
Button Symbol: A, B, C
Operating Voltage: 9V (1  x 6F22 -9V battery, can be used for 12 months)
Operating Current: 30mA
Operating Frequency:  315Mhz / 433Mhz
Encoding Chip: PT2262 / PT2264 / SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance:  1000m / 3000ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
Weight: 95g
How to set up the 8-bits code of the transmitter:
1. Open the transmitter shell, then you will see the circuit  board. There are two rows pads and one row of chip feet on the back side.
2. The upper row of pads is “L” side, and the lower row of pads  is “H” side.
3. If solder the middle row of chip feet to the “L” side, it is  code 1. If solder the middle row of chip feet to the “H” side, it is code 2.  Don’t solder to any side, it is code 0.
4. The 8-bits code order is from left to right (from A1 to A8).
5. Here is an example, the 8-bits code in the picture is  00010121, solder as the following way:
6. Code 0: don’t solder any side, like A1、A2、A3、A5.
7. Code 1: solder to the “L” side, like A4、A6、A8.
8. Code 2: solder to the “H” side, like A7.
Usage:
Power supply:
Connect power supply DC6V / 9V / 12V / 24V to terminal “INPUT”; connect motor to  terminal “OUTPUT”. You can exchange the output wires of motor to change the  rotating direction of motor.
Setting control mode Latched: Connect  JP1
Function of transmitter:
Press button ▲ on remote: terminal “Output” outputs DC power, motor rotates in  positive direction.
Press button ▼ on remote: terminal “Output” outputs DC power, motor rotates in  reversal direction.
Press button ● on remote: motor stops.
Function of manual buttons in receiver:
Press button K3 in receiver: terminal “Output” outputs DC power, motor rotates  in positive direction.
Press button K1 in receiver: terminal “Output” outputs DC power, motor rotates  in reversal direction.
Press button K2 in receiver: motor stops.
Setting control mode Momentary: Connect JP2
Function of transmitter:
Press and hold button ▲ on remote: terminal “Output” outputs DC power, motor  rotates in positive direction. Release button: motor stops.
Press and hold button ▼ on remote: terminal “Output” outputs DC power, motor  rotates in reversal direction. Release button: motor stops.
Function of manual buttons in receiver:
Press and hold button K3 in receiver: terminal “Output” outputs DC power, motor  rotates in positive direction. Release button: motor stops.
Press and hold button K1 in receiver: terminal “Output” outputs DC power, motor  rotates in reversal direction. Release button: motor stops.
Setting control mode Momentary: Connect  Jumper S2
Function of manual buttons in receiver:
Press and hold button K3 in receiver: terminal “Output” output DC power, motor  rotates in positive direction. Release button: motor stops.
Press and hold button K1 in receiver: terminal “Output” output DC power, motor  rotates in reversal direction. Release button: motor stops.
Restrictive function:
You can connect two restrictive switches to  terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the  motor will rotate; if the restrictive switch X1 or X2 is disconnected, the motor  will stop automatically. That means when the restrictive switch “X1” is  connected, the motor will rotate in positive direction; when the restrictive  switch “X1” is disconnected, motor will stop automatically. When the restrictive  switch “X2” is connected, the motor will rotate in reversal direction; when the  restrictive switch “X2” is disconnected, motor will stop automatically.
Learning the button of transmitter:
1) Press and hold “K3” button of receiver;  when signal LED on the receiver begin to shine, release “K3” button. Before  signal LED shines 5 seconds, press ▲ button of transmitter, if the signal LED  off, that means learning is successful.
2) Press and hold “K2” button of receiver;  when signal LED on the receiver begin to shine, release “K2” button. Before  signal LED shines 5 seconds, press ● button of transmitter, if the signal LED  off, that means learning is successful.
3) Press and hold “K1” button of receiver;  when signal LED on the receiver begin to shine, release “K1” button. Before  signal LED shines 5 seconds, press ▼ button of transmitter, if the signal LED  off, that means learning is successful.
Delete the button of transmitter:
We have learned transmitter to the receiver.  If you don’t want the receiver to work with transmitter, you can delete all  codes of transmitter which are stored in the receiver. You can operate as  following:
Press and hold “K3” button of receiver; when  signal LED on the receiver begin to shine, then flicker, finally off, that means  deleting is successful.
Press and hold “K2” button of receiver; when  signal LED on the receiver begin to shine, then flicker, finally off, that means  deleting is successful.
Press and hold “K1” button of receiver; when  signal LED on the receiver begin to shine, then flicker, finally off, that means  deleting is successful.
Shipping:
Shipping methods: Ship to Worldwide by Airmail.
Delivery time: 10~25 working days (not including week-end and holiday).
We will ship the item to your shipping address of PayPal within 1~2 working days after clearance of payment.
Please contact us immediately if you want to change your shipping address. We are not responsible for wrong address.
We will inform you via Email when shipping your items.
Guarantee:
Guaranty: One year, if the products have any quality problem, we will resend the same unit to you by free, but you need to defray the postage.