5000 Meters Long Range 30A NO NC Relay Output High Power Remote Control Switch

Description

Brand: CaryMart, Model: 0020092
15000  Feet Super-Far Range 30A High Load Dry Contact Output Remote Control Kit
5000  Meters Long Range 30A NO NC Relay Output High Power Remote Control Switch
Brand: CaryMart      Model:  0020092
Package Include:
1 x Receiver: S1PUW-DC
1 x Transmitter: CC-1 or CC-2
1 x User manual
Application:
This receiver is an electric device with dry relay output, it and the  transmitter form a receiver transmitter system. This system may be used in all  types of industry automation, agriculture, home, factory, house, farm, vehicle,  ship, offshore operations, aerial vehicle, etc. It can remote control equipment  on land, water and air, such as remote control of lights, sirens, locks, motors,  fans, winches, blinds, linear actuators, doors, windows, electric solenoid  valves, security alarm, and business signs. The applications are endless.
Feature:
Wireless control, easy to install.
Super long working range: With the transmitter forming a complete set, the  maximum working distance may reach 5000 meters in an open area.
Waterproof: The receiver has waterproof case and waterproof connector, it can be  installed outdoors.
Four operating voltage versions: DC 6V, 9V, 12V, 24V optional.
Relay Output: This receiver is dry relay output, it can be used to operate both  DC and AC equipment. The output terminals are NO / NC (normally open / normally  closed), serving as a switch.
High Power: Each channel can work at maximum load current 30A.
With wired control terminals: You can connect sensors, limit switches, manual  switches or external devices to control the receiver.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a  reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors,  doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the  receiver.
One or more transmitters / remotes can control one or several receivers  simultaneously.
Two or more receivers may be used in the same area..
Feedback Function:
The receiver and the transmitter have a Two-way working mode, so the user can  know the working status of the receiver by the transmitter.
Two-way working mode: When the receiver is successfully triggered by the signal  from the transmitter, it will immediately transmit a feedback signal to the  transmitter, then the transmitter will send out a buzzing sound to inform you  that the receiver has been successfully triggered.
Receiver Parameters:
Model No.: S1PUW-DC
Operating Voltage: 6VDC (model S1PUW-DC06), or 9±1VDC (model S1PUW-DC09), or  12±1VDC (model S1PUW-DC12), or 24±2VDC (model S1PUW-DC24), the operating voltage  must be specified when ordering.
Working Frequency: 433.92 MHz
Quiescent Current: ≤6mA
Channel: 1 CH
Output Type: Dry Relays Output (Normally Open and Normally Closed)
Maximum Load Voltage of Relay: 240VAC or 28VDC
Maximum Load Current of Relay: 30A / each channel
Wire Range of Terminals: 22-12 AWG
3 Selectable Modes: Self-locking, Momentary, Interlocking
Operating Temperature: -20°C ~ +70°C
PCB size: 90 x 59 x 18 mm (3.5 x 2.3 x 0.7 inches)
Case size: 100 x 68 x 50 mm (4.0 x 2.7 x 2.0 inches)
Matching Transmitters:
When you set the receiver in Self-locking mode or Momentary mode, it should work  with single button transmitter, such as model CC-1. When you set the receiver in  Interlocking mode, it should work with two buttons transmitter, such as model  CC-2.
Working Range:
With the transmitter (such as CC-2) forming a complete set, the maximum working  distance may reach 5000 meters in an open area.
The maximum working distance is based on theoretical data which would be without  barriers and without any RF interference. In practice, it will be hindered by  trees, walls or other construction, and will be interfered with by other  wireless signals. Therefore, the actual working distance may not reach this  maximum distance.
Transmitter Parameters:
Model: 0021060 (CC-1) / 0021061 (CC-2)
Channel / Button: 1 (CC-1) / 2 (CC-2)
Button Symbol: No Symbol (CC-1) / A, B(CC-2)
Operating Voltage: 9V (1 x 6F22-9V battery, can be used for 12 months)
Quiescent Current: 5μA
Working Current: 65mA (when the transmitter is transmitting the signal), 16mA(  when the transmitter is receiving the signal).
Operating Frequency: 433.92 MHz
Modulation Mode: FSK + LORA
Feedback indication: buzzing sound
Transmitting Distance: 5000 meters / 15000 feet (theoretically)
With power switch on the side.
Operating Temperature: -20°C ~ +70°C
Unit Size: 135 x 42 x 25 mm (5.3 x 1.7 x 1.0 inches)
Wiring:
1) If you want to control a DC 12V lamp, do as following:
1.1 Connect the positive pole of DC power supply to terminal L/+, and connect  the negative pole of DC power supply to terminal N/-.
1.2 Connect terminal B to the positive pole of DC power supply, connect terminal  C to the positive pole of DC lamp, and connect the negative pole of DC lamp to  the negative pole of DC power supply.
2) If you want to control an AC 220V lamp, do as following:
2.1 Connect the positive pole of DC power supply to terminal L/+, and connect  the negative pole of DC power supply to terminal N/-.
2.2 Connect terminal B to the live wire of AC power supply, connect terminal C  to one side of AC lamp, and connect another side of AC lamp to the neutral wire  of AC power supply.
Three Control Modes:
1) The operation of Self-locking mode with the transmitter CC-1:
Press the button on the transmitter: The relay in the receiver is activated, and  the connected lamp is turned on.
Press the button again: The relay is deactivated, and the connected lamp is  turned off.
2) The operation of Momentary mode with the transmitter CC-1:
Press and hold the button on the transmitter: The relay in the receiver is  activated, and the connected lamp is turned on.
Release the button: The relay is deactivated, and the connected lamp is turned  off.
3) The operation of Interlocking mode with the transmitter CC-2:
Press the button A on the transmitter: The relay in the receiver is activated,  and the connected lamp is turned on.
Press the button B on the transmitter: The relay is deactivated, and the  connected lamp is turned off.
Wired control  terminals:
The receiver has wired control terminals, and you can connect external devices,  sensors, or manual switches to these terminals, then use them to control the  receiver.
1) By low level signal:
You can connect the external devices (with low level output signal) to the  terminal 2 (Signal+) and the terminal 1 (Signal−), then use the external devices  to control the receiver.
When the external device outputs low level signal to the terminals 1 and 2, the  relay in the receiver is activated, and the connected lamp is turned on.
When the external device stops to output signal, the relay is deactivated, and  the connected lamp is turned off.
2) By NO/NC contact:
You can connect the manual switches (with NO/NC contact) to the terminals 1 and  2, then use the manual switches to control the receiver.
When connect the terminals 1 and 2 by the manual switch, the relay in the  receiver is activated, and the connected lamp is turned on.
When disconnect the terminals 1 and 2 by the manual switch, the relay is  deactivated, and the connected lamp is turned off.
Delivery:
1. We only ship item to your PayPal  verified address.
2. The items will be dispatched within 1~2 working days after the payment is  clear, but customized products need to wait longer days.
3. The delivery time by Airmail to some main countries (including United States,  United Kingdom, Germany, France, etc.) is about 7~12 working days. And the  delivery time by Airmail to other most countries is about 7~20 working days.
4. Most times you will receive your order within reasonable days after we  transfer your parcel to the transport company, but we cannot guarantee the  delivery timeframe if the transport company has any unexpected delays due to  holiday, weather, customs, or other conditions.
5. If you haven't received items in the appropriate days, please feel free to contact us via  ebay  message instead of leaving negative/neutral feedback or opening a dispute. We  will make every effort to fix any problem, such as resending or refunding.
Import Customs Duty:
1. If the parcel weighs is less than 2  Kgs, we will ship it by Airmail, and the customs usually don't levy the import  duties and taxes, but sometimes levy it, and the probability is about 5%.
2. If the parcel weight is greater than 2 Kgs, we will ship it by Express Mail,  such as DHL or FedEx, and the customs usually levy the import duties and taxes.
3. The item price includes the value of goods and export taxes, but not  including international import duties. And the shipping fee also do not include  import duties and taxes.
4. Import duties are buyers' responsibility, so buyer should be responsible for  any import duties and taxes. We will put lower value on customs declaration to  avoid or reduce your import duties and taxes.
And if  you have to pay import duties and taxes, we will return you a discount coupon  with the same amount.
5. When the transport company or the customs informs you to pay the import  duties, if you don't agree to pay, the parcel will be returned or destroyed, and  the customer need to bear all responsibility and cost.
Warranty:
1. The warranty period is two years.
2. During the warranty period, if there is any quality problem caused by  non-human being, we will replace the new product for free, but you will need to  pay the relevant freight.
Feedback:
1. Any questions, please contact us via  ebay message. We will reply your message within 48 hours.
2. If you are satisfied with our service, please kindly leave us a positive  feedback. Please do not leave negative feedback without contacting us for help.