-40%
4
4
4
4
4

4"d x 1/2"W WHEEL BRUSH 5/8" hub MEDIUM Nylon Bristles Disc RESEARCH

$ 4.22

Availability: 16 in stock
  • Mounting Type: Arbor Hole
  • Trim Length: 1-1/2 in
  • Arbor Hole Size: 5/8 in. (will work on 1/2" arbor at lower RPM)
  • Brand: BRUSH RESEARCH MANUFACTURING
  • ItemPackageQuantity: 1
  • Abrasive Material: Nylon bristles - no abrasive
  • Condition: Unused, or at least no discernible use.
  • Wire Type: Crimped Wire
  • Brush Diameter: 4 in
  • All returns accepted: ReturnsNotAccepted
  • MPN: CN420C McMaster Carr 4747A67
  • Wire Diameter: 0.010 in
  • Face Width: 1/2 in

    Description

    Brushes are nominal 1/2"W (originally purchased from McM-Carr see spec sheet below). Hub thickness is actually 3/8" (bristle spread is apparently counted to make it nominally 1/2 in.). To gang brushes together, washers can be used between brushes to allow more spread, and/or fewer brushes needed per running length.
    I also have a stock of the finer bristle version of this brush with 0.006 bristles and a 1/2" arbor hole (also see spec. sheet below).
    I also have 2 threaded 5/8" stainless steel spindles with 5" threaded zone, and 1-1/8" turn-downs at each end to 3/8" diam. (see photo). These are available separately (please search my other listing for "spindle"). I also have stainless steel washers which may be paced between brushes so the hub dimension will match the 1/2" brush face width - I will give away to any buyer who wants them.
    Qty. shipping discount on anything I sell (note, if qty. purchase does not correctly adjust the shipping amount, I will refund any over-payment back to your PP acct.).