30/60A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual-USB

Description

Product Features
For 30A
30A Solar Charge Controller: This solar charge controller can automatically and intelligently recognize 12V/24V system, safe and reliable. Built-in industrial microcontroller automatically manages the working process of solar panel and battery in solar system. Dual USB output ports allow you to charge two mobile phones or other USB devices.
Multiple Protection Systems: Built-in short-circuit protection, open-circuit protection, reverse protection and over-current protection can effectively protect your devices. The 3-stage PWM charge management technique greatly improves charging efficiency and prolongs the life span of the battery.
Battery Type: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Li-ions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drops below 8V, the solar controller will turn off automatically.
LCD Display: The LCD display function can clearly show the status and data, and makes the mode change and parameter configuration more convenient. Suitable for home, industrial, commercial, etc.
Dual Control Methods: This regulator can intelligently control the discharge process via either sunshine or time, convenient and practical.
For 60A
60A Solar Charge Controller: This solar charge controller can automatically and intelligently recognize 12V/24V system, safe and reliable. Built-in industrial microcontroller automatically manages the working process of solar panel and battery in solar system. Dual USB output ports allow you to charger two mobile phones or other USB devices.
Multiple Protection Systems: Built-in short-circuit protection, open-circuit protection, reverse protection and over-current protection can effectively protect your devices. Complete 3-stage PWM charge management technique greatly improves charging efficiency and prolongs the life span of the battery.
Battery Type: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Li-ions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drops below 8V, the solar controller will turn off automatically.
LCD Display: LCD display function can clearly show the status and data, and makes the mode change and parameter configuration more convenient. Suitable for home, industrial, commercial etc.
Dual Control Methods: This regulator can intelligently control the discharge process via either sunshine or time, convenient and practical.
Specification
:
For 30A
Material: ABS,
Interface: Dual USB
USB Output: Max 5V/2A
Standby Current: ＜10mA
Discharge Current: 10A
Working Temperature: -35℃-60℃
Power Source: 12V/24V
Product Size: about 13.3 x 7 x 3.5cm/5.2 x 2.8 x 1.4in
For 60A
Material: ABS
Interface: Dual USB
USB Output: Max 5V/2A
Standby Current: ＜10mA
Discharge Current: 20A
Floating Charge Voltage: 14.6V (Default; Adjustable Range: 13-15V)
Discharge Stop Voltage: 10.7V (Default; Adjustable Range: 9.5-11V)
Discharge Reconnect Voltage: 12.6V (Default; Adjustable Range: 11.5-13.0V)
Working Temperature: -35℃-60℃
Power Source: 12V/24V
Product Size: about 18 x 9 x 4.5cm/7.1 x 3.5 x 1.8in
Security Instructions:
1. Make sure that the battery has enough voltage for the controller to recognize the type of battery before the first installation.
2. The battery cable should be as short as possible to minimize losses.
3. The charge controller is only suitable for the regulation of solar modules. Never connect another load source to the charge controller.
4. The charge controller will heat up when it is running. Please be careful to install the charger controller in a flat, well-ventilated place.
Connection of the System:
1.Connect the positive and negative post of the battery to the charge controller in accordance with the installation chart.
2.Connect the positive and negative post of the load to the regulator in accordance with the installation chart. Do not reverse the connection.
3.Connect the solar panel to the regulator in accordance with the installation chart.
Notes:
Please note that the floating charge voltage, discharge stop voltage and discharge reconnect voltage parameters in the specifications are for 12V systems. Please double the value if it is used for 24V system.
Please allow a slight dimension difference due to different manual measurements.
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Package Include
1 x Solar Panel Charge Controller